| View file | ||||
|---|---|---|---|---|
|
Refer to
...
- boolean union
- boolean difference
drafting > linear dimension
set CPlane World Front
Practice tasks:
- 2a:
- create a new Rhino file
- create a box using 6 flat pieces, each of 3mm and overall dimension is with 3mm thickness, with those flat pieces touching each other, and with overall dimension of 100mm x 100mm x 100mm
- on one flat piece on top of the box, add a square hole with size 10mm x 10mm 10mm at the centre
- Submission::
- In your submission page, add the heading "Part 2a"
- save your file, upload to your submission page under the heading "Part 2a", with at least two screen captures of the Rhino document, showing different perspective views of what you have created.
- 2b:
- create multiple boxes
- rotate and set them touching each other only along an edge, with no other part of the box touching each other
- Submission::
- In your submission page, add the heading "Part 2b"
- save your file, upload to your submission page under the heading "Part 2b", with at least two screen captures of the Rhino document, showing different perspective views of what you have created.
...
| View file | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Commands:
- Box
- OSnap - End, Mid
- CPlane
- BooleanDifference
- BooleanUnion
- Gumball
- View - Wireframe, Ghost
- Orient3pt
- Copy, Paste
- Move
- Make2D
- Export Selected > DXF ("R12 Natural")
...
| View file | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Practice task:
- create three plates, each of 3mm thickness and at least 20mm on each side
- place the three plates so that one touching another, and the angle between two plates should NOT be exactly 90deg
- for each contact point, add at least one joinery which can be laser-cut; there should be at least one joinery for each pair of plates, for two pair of plates
- Submission:
- save your file, upload to your submission page under the heading "Part 5", with at least two screen captures of the Rhino document, showing different perspective views of what you have created.
...