The board we are using is : https://robotdyn.com/uno-wifi-r3-atmega328p-esp8266-32mb-flash-usb-ttl-ch340g-micro-usb.html
Sharing from Gio: https://connectpolyu-my.sharepoint.com/:f:/g/personal/19086166r_connect_polyu_hk/EtNBx8LP0tlClJZ5BSjFVuQBLYXnUcxsiCT3dEPDqHeLDA?e=rUJF9I
Task1 : install and upload, also refer to SD3762 arduino cheatsheet (will keep expanding as we go)
Arduino Software: https://www.arduino.cc/en/Main/Software
Driver: http://www.wch.cn/downloads/CH341SER_EXE.html
Before we upload: For the dipswitch: 3,4,7 should be on. 
Switch status and mode selection:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|---|---|---|---|---|---|---|---|---|
CH340 connect to ESP8266 (upload sketch) | OFF | OFF | OFF | OFF | ON | ON | ON | NoUSE |
CH340 connect to ESP8266 (connect) | OFF | OFF | OFF | OFF | ON | ON | OFF | NoUSE |
CH340 connect to ATmega328 (upload sketch) | OFF | OFF | ON | ON | OFF | OFF | OFF | NoUSE |
Mega328+ESP8266 | ON | ON | OFF | OFF | OFF | OFF | OFF | NoUSE |
All modules work independent | OFF | OFF | OFF | OFF | OFF | OFF | OFF | NoUSE |
Task2: LED and Blink
Task3: Knob/Servo